Türkçe
English
Deutsch
繁體中文
Español
العربيةSingle Channel Detectors
Here you can find all single channel detectors from InfraTec
Infrared detectors for gas analysis, flame detection and radiometry in TO18 or TO39 packages.
- Housing types TO18 and TO39
- Voltage or current mode
- Signal processing with JFET or operational amplifier
- Thermally compensated (optional)
- With special chip holder for reducing the microphonic sensitivity (optional)
| Type | Housing | Channel | Aperture (mm) | Operating modes | JFET/OpAmp | Thermal Compensation | Low Micro | Detectivity* | Download further information |
|---|---|---|---|---|---|---|---|---|---|
| LIE-200 | TO18 | 1 | ø 2.3 | Current Mode | JFET | No | No | 0.55 | LIE-200 |
| LIE-202 | TO18 | 1 | ø 2.3 | Voltage Mode | JFET | No | No | 4.0 | LIE-202 |
| LIE-216 | TO18 | 1 | ø 2.3 | Voltage Mode | JFET | Yes | No | 3.0 | LIE-216 |
| LIE-316 | TO39 | 1 | 5.0 x 5.0 | Voltage Mode | JFET | Yes | No | 4.0 | LIE-316 |
| LME-302 | TO39 | 1 | 5.0 x 5.0 | Voltage Mode | JFET | No | Yes | 6.0 | LME-302 |
| LME-316 | TO39 | 1 | 5.0 x 5.0 | Voltage Mode | JFET | Yes | Yes | 4.0 | LME-316 |
| LME-335 | TO39 | 1 | 5.0 x 5.0 | Current Mode | OpAmp | Yes | Yes | 6.0 | LME-335 |
| LME-336 | TO39 | 1 | 5.0 x 5.0 | Current Mode | OpAmp | Yes | Yes | 4.0 | LME-336 |
| LME-351 | TO39 | 1 | 5.0 x 5.0 | Current Mode | OpAmp | No | Yes | 1.8 | LME-351 |
| LME-352 | TO39 | 1 | 5.0 x 5.0 | Current Mode | OpAmp | No | Yes | 1.5 | LME-352 |
| LME-501 | TO39 | 1 | 5.0 x 5.0 | Current Mode | none | No | Yes | LME-501 | |
| LME-551 | TO39 | 1 | 5.0 x 5.0 | Current Mode | OpAmp | No | Yes | 2.5 | LME-551 |
*(500 K, 10 Hz, 1 Hz, 25 ºC, without window) [10E+8cmHz1/2/W]